Description:
Details： FE1/V.35 Protocol Converter
uAs a cost effective solution for the traditional telecom services
migrate to the IP packet networking technology, This type converter
adopts the innovative TDM over IP technology, it transports the
legacy E1 data through the existing IP network.
uIt is the second generation of the TDM over IP equipment with IP
circuit emulation that supports transportation of two E1 and two
local Ethernet ports over the IP network. The uplink port and user
data ports are IEEE 802.3 compliant, 10/100BaseT auto-sensed
Ethernet ports.
uThe state-of-the-art design provides the highest availability with
the accurate timing signal and data bit stream reconstruction.
Predefined system parameter profiles that according to different
application requirements ultimately simplify the installation
process and saving the maintenance cost.
uTelecom and Enterprise users can save a lot of access and equipment
costs and generates new revenue by offering different types of
service over existing Ethernet networks. It is also suitable for
connecting to the wireless equipment to achieve fast deployment of
E1 services. One particular application is to build E1 links with
low cost Wireless LAN bridges, replacing much more costly microwave
radios. Operators can use it to provide legacy TDM services over
wired or wireless packet network.
Features:
uStable E1 clock recovery, low jitter and wander
uLow processing delay for E1 channels, high bandwidth usage
efficiency
uResist to packet loss, with PCM frame synchronization protection
uUser definable packet size from 128 bytes up to 1408 bytes
uEnough jitter buffer to resist packet delay variation (PDV)
uLocal Ethernet port throughput limiting, assuring E1 QoS
uLocal and remote E1 LOS and AIS and packet loss indication for
trouble-shooting and maintenance
uAdaptive E1 port impendence (75 and 120) for coax and twisted pair cables
uUser selectable level 2 (Ethernet) or level 3 (IP) encapsulation
options
uQuick setup hardware mode switch
uSupport cascade concatenate for more than 2 E1 ports
Specifications:
Items | Description |
Interface | Uplink | Comply with IEEE 802.3 |
E1 Port | 2 E1 Ports supported Comply with G.703 Impedance: 75 and 120 |
User Data Port | 2 User Data Ports Supported Comply with IEEE 802 |
